santee

Fitment: Fit For 1984-later FLT / FLHT / FLHX and trike models. Requires 1" Clamp / Riser. Feature: Drilled for internal wiring, and notched for throttle-by-wire applications. With indents for clutch and brake master cylinders (one on each side). Available in 12", 14", 16",...

Fitment: Fit For Most Big Twin (non-FLH / T / X), Sportster and Road King models 00-Later, requires 1" Clamp / Riser. Feature: Drilled for internal wiring, and notched for throttle-by-wire applications. Available in 12", 14", 16", 18", and 20" heights, as well as in...

Color: Chrome, Gloss Black Dimensions: Rise: 10" Bar Diameter :1 1/4"Clamp Area Diameter: 1 1/4"Grip Area Bar Diameter: 1"Width: 39"Pullback: 10.5"Center Width: 9.5"Knurl Center-to-Center : 3" Fitment: These Bars give your Road Glide or Road King a cool Z Bar look with a comfortable feel while...

Color: Gloss Black, Chrome Dimensions: Rise: 6" Bar Diameter :1 1/4"Clamp Area Diameter: 1 1/4"Grip Area Bar Diameter: 1"Width: 35"Pullback: 10.5"Center Width: 9.5"Knurl Center-to-Center : 3" Fitment: These Bars give your Road Glide or Road King a cool Z Bar look with a comfortable feel while...

Color: Gloss Black Dimensions: Rise: 8" Bar Diameter:1 1/4"Clamp Area Diameter: 1 1/4"Grip Area Bar Diameter: 1"Width: 36.5"Pullback: 10.5"Center Width: 9.5"Knurl Center-to-Center : 3" Fitment: These Bars give your Road Glide or Road King a cool Z Bar look with a comfortable feel while in the...

Fitment: Fit for models with 1-1/4" (tube diameter)engine guards.  This product will not work with chopped engine guards.   Product Detail: Color: Matte Black, Chrome Mounting diameter: 1-1/4". Mount close to the rider position to suit short riders, reverse to reach far forward for riders...

Fitment: Fits For all models from 1982-up, including Throttle-by-wire models, and any Custom Application. NOTE: When mounting a 1-1/4" diameter handlebar with a 1" center mounting section, a solid clamp must be used to properly support the bar and prevent breakage. Feature: ‘Diablo’ 1-1/4” Bars for all models...

Fitment: Fits For all models from 1982-up, including Throttle-by-wire models, and any Custom Application. NOTE:When mounting a 1-1/4" diameter handlebar with a 1" center mounting section, a solid clamp must be used to properly support the bar and prevent breakage. Feature: ‘Diablo’ 1-1/4” Bars for all models with 3.5”...

Fitment: Fit For 84-later FLT / FLHT / FLHX and trike models. Requires 1-1/4" Clamp / Riser. Feature: Drilled for internal wiring, and notched for throttle-by-wire applications. With indents for clutch and brake master cylinders (one on each side). Available in 12", 14", 16",...

Fitment: Fit for most models from 1982-Up including Throttle-By-Wire applications with 3.50” center-to-center riser mounting holes. For internal wiring only. Feature: Available in 6", 8", 10", and heights, as well as in chrome or black finishes. Please inquire with us if you need. Product Information:...

Fitment: Fit for most models from 1982-Up including Throttle-By-Wire applications with 3.50” center-to-center riser mounting holes. For internal wiring only. Feature: These are the perfect bars to give your ride that aggressive, no-nonsense look. They feature straight risers, pre-drilled for internal wiring (with a pre-installed...

Color: Chrome Dimensions: Rise: 10" Bar Diameter:1 1/4"Clamp Area Diameter: 1"Grip Area Bar Diameter: 1"Width: 34"(adjusted)Pullback: 7"Center Width: 5.5"Knurl Center-to-Center : 3.5" CALIBARZ bars feature 360° adjustable hand control mounting that allows rotation to any direction freely. They are 1-1/4" in diameter while keeping the...

Features: Bamboo bars look sharp and feature 360° adjustable hand control mounting that allows rotation to any direction freely. Non-dimpled and notched for throttle-by-wire applications. Color:  Matte Black Dimensions: Rise: 10" Bar Diameter :1 1/4"Clamp Area Diameter: 1 1/4"Grip Area Bar Diameter: 1"Width: 32"Pullback: 7"Center Width:...

Fitment: Custom Rear Fenders Designed specifically for  fit Avon 230-250 series tires.  Note: Listing is for a raw fender.Always be sure to check fitment and clearance before painting. Product Information: 10-1/2"-Ultra-Wide Custom Fender Made of 18-gauge Raw steel,Unpainted  Undrilled for custom applications. No instructions. Package Included: 1 x Rear Fender   ...

Fitment: Fits For Harley 66-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 71-20 Sportster, 91-17 Dyna, 84-21 Softail ATTENTION: Listing is for a raw fender.Always be sure to check fitment and clearance before painting. Product Information: ‘Roll-Your-Own’ Custom Blank Steel Fender Smooth-Side Rear Fenders with 13-3/8" Radius,Measures...

Fitment: Fits For Harley 66-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 71-20 Sportster, 91-17 Dyna, 84-21 Softail ATTENTION: Listing is for a raw fender.Always be sure to check fitment and clearance before painting. Product Information: ‘Roll-Your-Own’ Custom Blank Steel Fender Round-Top Rear Fenders with 13-3/8" Radius,Measures...

Fitment: Fits For Harley FLHT/C/U/X models from 1982-Up including Throttle-By-Wire applications.  NOTE: Handlebars must be internally wired. When mounting a 1-1/4" diameter handlebar with a 1" center mounting section, a solid clamp must be used to properly support the bar and prevent breakage. Feature: 1-1/4” Ape Hanger...

Fitment: Fits For Harley 66-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 71-20 Sportster, 91-17 Dyna, 84-21 Softail ATTENTION: Listing is for a raw fender.Always be sure to check fitment and clearance before painting. Product Information: ‘Roll-Your-Own’ Custom Blank Steel Fender Smooth-Side Rear Fenders with 13-3/8" Radius,Measures...

Fitment: Fits For Harley most Big Twin and Sportster models from 1982-2013 (except FLHT models) with 3.5” center spacing.  These handlebars will also work with Throttle-By-Wire applications. NOTE: Handlebars must be internally wired. When mounting a 1-1/4" diameter handlebar with a 1" center mounting...

Fitment: Fit for most models from 82-Up including Throttle-By-Wire applications with 3.50” center-to-center riser mounting holes. For internal wiring only. Feature: These are the perfect bars to give your ride that aggressive, no non-sense look. They feature straight risers, pre-drilled for internal wiring (with a...