Handlebars & Controls

Fitment: Fits For most Harley-Davidson FLST, FXST, Sportster XL, including Throttle-by-wire models, and any Custom Application. Feature: They are 1-1/4" diameter while keeping the grip and clamping are a 1" for a beefy look while maintaining the use of your stock controls and clamps. Notched...

Fitment: Fits For models from 1984-up Harley Most Big Twin, Sportster, Road King and Pre-2015 Road Glide  (except FLH/T/X models). Feature: Notched for throttle-by-wire capability. Center section and tips taper to 1" so that standard handlebar controls fit. Product Information: Specifications Style Bandits Handlebars...

Fitment: Fits For models from 1984-up Harley Most Big Twin, Sportster, Road King and Pre-2015 Road Glide  (except FLH/T/X models). Feature: Notched for throttle-by-wire capability. Center section and tips taper to 1" so that standard handlebar controls fit. Product Information: Specifications Style Bandits Handlebars...

Fitment: Fits For models from 1984-up Harley Most Big Twin, Sportster, Road King and Pre-2015 Road Glide  (except FLH/T/X models). Feature: Notched for throttle-by-wire capability. Center section and tips taper to 1" so that standard handlebar controls fit. Product Information: Specifications Style Bandits Handlebars...

Fitment: Fits For 1982-up Harley-Davidson FLST, FXST, Sportster XL DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application. Feature: Pre-drilled oversize holes accommodate any internal wiring.  1-1/4"-diameter center section tapers to 1" so that stock controls fit.  The right side has a...

Fitment: Fits For 1982-up Harley-Davidson FLST, FXST, Sportster XL DYNA, LOWRIDER, 48 Sportster, including Throttle-by-wire models, and any Custom Application. Feature: Pre-drilled oversize holes accommodate any internal wiring.  1-1/4"-diameter center section tapers to 1" so that stock controls fit.  The right side has a...

Fitment: Fit For Harley FLD '12-'16, Fit For Harley FL Softail '86-'17 (except FLS, FLSS, FLSTFB and FLSTFBS),  Fit For Harley Touring (except FLHTCUL and FLHTKL) and Trike models '86-later .   Product Information: Color: Chrome, Gloss black finish with anti-slip rubber. The gorgeous design of our floorboards provides a truely customized look....

Fitment: Fit For most harley models (except ’06-’17 VRSC models with forward controls and ’08-’13 XR models).   Product Information: Color: Gloss Black Chrome finish with anti-slip black rubber. Sold in each. Quick and easy installation. No instructions. Package Included: 1x shifter peg    * California Residents Warning: California's Proposition 65....

Fitment: Fit for models with 1-1/4" (tube diameter)engine guards.  This product will not work with chopped engine guards.   Product Detail: Color: Matte Black, Chrome Mounting diameter: 1-1/4". Mount close to the rider position to suit short riders, reverse to reach far forward for riders...

Fitment: Fit For harley all models in rider, passenger and highway peg positions with male mount style footpeg supports.   Product Information: Color: Chrome, Gloss black finish with anti vibration black rubber. Width of male mount: 1/2". Mount hole I.D.: 3/8”. Sold in pairs. Quick and easy...

Fitment:   Fits For Harley Touring models 1994-later More Information: Custom Chrome 2024 Brand New Rear Air Ride Suspension Kits This is a complete kit assembled to replace your stock touring shocks with height-adjustable air shocks. Fully Collapsed approx. 9.64 inches(24.5cm); fully extended 14.17 inches(36cm)....

Fitment:   Fits '14-later Touring models (except FLHTKL, FLHTCUL, ’23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, '24 FLTRXSTSE and '25-later FLHXU and FLTRXRRSE). More Information:  Buffer rubber ring provide improved plush ride quality, control, and resistance to bottoming-out. No tools required for compression and rebound...

FeaturesWaterproof,dust-proof (IP)：IP54Output Voltage：DC-12VWorking Period：15%@100PSIMaximum Working Voltage：130PSI(9.1KG/c㎡)Maximum current：14APump's Size(L×W×H)：152mm × 88.5mm × 135mmThe Ventilating Flux: 1.27CFM@0PSI, When under 0PSI, the rate of flow is approx. 36.0L/MIN.(Calculation formula: 1CFM=28.3185 L/MIN) Aftermarket 100% brand new This is a complete kit assembled to replace your stock touring shocks...

FEATURES:   Condition: Aftermarket 100% Brand New Color:Black(As prictures shown) Material:Metal+Aluminum+Stainless steel This item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically.  Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to...

FEATURES: Condition: Aftermarket 100% Brand New Color:Black(As prictures shown) Material:Metal+Aluminum+Stainless steel This item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically.  Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to sit...

Fitment: Fit for Harley "TBW" APPLICATIONS 2008-UP   More Information: These grips are available for both cable and Throttle-By-Wire applications These grips are CNC-machined from billet aluminum and covered with soft and pliable rubber.  Available in a beautiful chrome-plated.  Sold in pairs. Included Items: 1...

Fitment: Fit for Harley 2008-up "TBW" Applications   More Information: These grips are available for both cable and Throttle-By-Wire applications These grips are CNC-machined from billet aluminum and covered with soft and pliable rubber.  Available in a beautiful gloss black.  Sold in pairs. Included Items:...

Fitment: Fit for Harley 1973-up Cable Style Applications (except 08-up touring)   More Information: These grips are available for both cable and Throttle-By-Wire applications. These grips are CNC-machined from billet aluminum and covered with soft and pliable rubber.  Available in a beautiful chrome-plated.  Sold...

Fitment: Fit for Harley 1973-up Cable Style Applications (except 08-up touring)   More Information: These grips are available for both cable and Throttle-By-Wire applications These grips are CNC-machined from billet aluminum and covered with soft and pliable rubber.  Available in a beautiful gloss black. ...

Fitment: Fit for Harley "TBW" APPLICATIONS 2008-UP   More Information: These grips are CNC-machined from billet aluminum and covered with soft and pliable rubber.  Available in a beautiful chrome-plated.  Sold in pairs. Included Items: 1 Pair Hand Grips (as shown in picture)     * California Residents Warning: California's Proposition 65....